Bosch Serie I2 Gebrauchsanleitung Seite 20

1
5"
15 cm
20
B O SC H
Turbo
This programme is designed to iron those difficult
garments which require high temperature (only the type of
garment that allows it
1 Press the steam release button (17) for ironing with
steam.
Important: When placing the iron on the pad (15), be
sure to first insert the heel in the upper side of the control
panel, as shown in the figure.
2
This appliance has a special function for tackling difficult
creases.
1 Press the steam release button (17) two times in
quick succession (double-click). Powerful shots of
2x
steam will be released.
Can be used to remove creases from hanging clothes,
curtains, etc.
1 Select "Turbo" mode turning the ironing programme
selection knob (16).
2 Activate "high steam" mode by pressing "Set" button
(1).
3 Hold the iron in an upright position 15 cm away from
the garment to be steamed.
4 Press the steam release button (17) repeatedly with
pauses of at least 5 seconds.
"Turbo" programme
).
4. Ironing
"PulseSteam" function
Vertical steam
* Model dependent