Installation Steps; Package Contents - Axis M1054 Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing
AXIS M1054 Network Camera on your network. For other aspects of using
the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials
necessary for the installation are in order. See page 7.
2. Study the hardware overview. See page 8.
3. Study the specifications. See page 11.
4. Install the hardware. See page 15.
5. Access the product. See page 18.

Package Contents

• AXIS M1054 Network Camera
• Indoor power adaptor (Europe, UK, USA/Japan, Australia, Korea,
Argentina, China)
-
-
• Extension tube
-
-
• Flexible clamp (for shelf mounting)
• Printed materials
-
-
-
AXIS M1054 Network Camera
PS-V, or
PS-H (including power adaptor extension cable
1.8 m (5.9 ft))
Attached short extension tube, 4 mounting screws
and plugs
1 long extension tube, 1 cable clip, 1 tube joint
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
7