Axis M1054 Installationshandbuch Seite 9

LED Indicators
Note
• The Status LED can be configured to be unlit during normal
operation. To configure, go to Setup > System Options > Ports
& Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is
active.
• The Status LED can be configured to flash for identifying the
unit. Go to Setup > System Options > Maintenance .
Status LED
Green
Amber
Red
Network LED
Green
Amber
Unlit
AXIS M1054 Network Camera
Indication
Steady green for normal operation.
Steady during startup and when
restoring settings.
Flashes red for firmware upgrade
failure.
Indication
Steady for connection to a 100
Mbit/s network. Flashes for
network activity.
Steady for connection to a 10
Mbit/s network. Flashes for
network activity.
No network connection.
9