Step 2-Connecting The Aerial; Connecting An Indoor Aerial; Connecting An Outdoor Aerial - Sony Trinitron KV-14V4D Bedienungsanleitung

Step 2 — Connecting the Aerial

Connecting an Indoor Aerial

If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied monopole aerial as follows.
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for best reception.

Connecting an Outdoor Aerial

For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the
Rear
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the
Rear
VHF/UHF mixer
After connecting the aerial, connect the mains lead to a wall outlet.
2
1
(aerial) socket of the video TV.
VHF/UHF aerial
or
(aerial) socket of the video TV.
UHF aerial
300-ohm twin-lead cable
75-ohm coaxial cable
On a wall
VHF aerial
5
Getting Started
GB