Manual Fine-Tuning - Sony Trinitron KV-14V4D Bedienungsanleitung

ON TIMER MENU
SLEEP OK
SHOW VIEW
1 2 3
ONCE
6
4 5
DAILY
9
7 8
WEEKLY
÷
0
PROGR
TIMER REC
TIMER ON
REC
ON/OFF CLEAR
SCREEN
QUICK COUNTER
PAUSE
TIMER RESET
PLAY
REW FF
STOP
To reactivate automatic fine-
tuning (AFT)
Repeat from the beginning and
select "ON" in step 5.

Manual Fine-Tuning

Normally, the automatic fine-tuning (AFT) is already working. However, if
the picture of a programme is distorted, you can use the manual fine-
tuning function to obtain better picture reception.
1
Press MENU to display the main menu.
2
Move the cursor (z) to "PROGRAMME PRESET" with + ◊ or – √ and press
OK.
The PROGRAMME PRESET menu appears.
3
Move the cursor (z) to "MANUAL PROGRAMME" with + ◊ or – √ and
press OK.
The MANUAL PROGRAMME menu appears.
4
Using + ◊ or – √, move the cursor (z) to the programme position which
you want to manually fine-tune.
MANUAL PROGRAMME
PROG SYS BAND LABEL AFT
0 B G / V– L – – – – – ON
1 B / G V– H – – – – – ON
2 B / G UHF – – – – – ON
S e l e c t a nd p r e s s OK
5
Press OK repeatedly until the AFT position turns red, then press + ◊ or – √
to select OFF.
6
Press OK.
The tuning bar turns red.
While holding down + ◊ or – √, the tuning bar flashes red and green by
turns, and the channel is fine-tuned. When the best TV reception is found,
release + ◊ or – √.
7
Press OK.
The cursor (z) appears. Now the fine-tuned level is stored.
8
Repeat steps 4 to 7 to fine-tune other channels.
9
Press MENU to go back to the original screen.
11
Getting Started
GB