Installation Steps; Package Contents - Axis Q1775-E Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing AXIS Q1775–E Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com.

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 15.
4. Install the hardware. See page 18.
5. Access the product. See page 20.

Package Contents

• AXIS Q1775-E Network Camera (50Hz/60Hz)
• 4-pin I/O connector block for connecting external devices to the I/O connector
• Two 2-pin connectors for RS-485/422 connection
• Wall bracket
• Torx T20 screwdriver
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key
AXIS Q1775-E Network Camera
9