Gardena Smart System Handbuch Seite 21

Reset
You may need to use the reset function if you want
to link your Gateway to a new Wi-Fi network,
for example, or if you have changed your Internet
provider.
1. Press and hold the reset button.
2. At the same time, plug in the Gateway.
Hold down the reset button until the power LED
lights up green.
The power LED will light up continuously for approx.
ten seconds, before it starts to flash. The flashing
can last for approx. one minute. When the power
LED lights up continuously again, your Gateway is
ready to connect to the Internet.
21