SoClean 2 Benutzerhandbuch Seite 8

INCLUDED WITH YOUR SOCLEAN
Number
1
2
3
4
5
6
7
4 | INCLUDED WITH YOUR SOCLEAN
Part Name SKU
Removable PN1214
Hose Slot Plug
Disinfecting N/A
Chamber
Lid Gasket PN1215
SoClean Lid N/A
Cartridge Filter PN1207
Neutralizing PN1101
Pre-Wash
(not available
in all countries)
Hose Detect N/A
Switch
Description
This allows you to set up the SoClean device on either the right or
left side of your PAP machine. Place this in the hose slot that you
don't use.
Place your mask in here when you wake up.
Close the lid to ensure that the daily disinfecting cycle runs.
Ensures tight seal around the Disinfecting Chamber when the
SoClean lid is closed. Do not close the lid without this part in place.
Close the lid after you place your mask to ensure that the automated
disinfect cycle occurs.
You can repurchase it along with the Check Valve as part of the
Cartridge Filter Kit. This Cartridge Filter converts ozone back into
normal oxygen. Remove outer plastic wrapping and blue tape.
The Neutralizing Pre-Wash removes any material or odour that could
react with ozone. Wash your PAP equipment before connecting the
SoClean device, or when you receive a new mask, hose or reservoir.
The Hose Detect Switch detects when the SoClean device is
configured for operation by detecting the presence of the hose in the
hose slot when the lid is closed. When there is no hose installed in
the hose slot the SoClean device is designed to not run a disinfecting
cycle. Hose Detect Switch operation can be inspected by gently
pushing down and releasing the gray plastic switch and hearing an
audible click. The switch should move freely down and up when
gently pressed.
Note: Do not remove gasket from Hose Detect Switch slot.