Call Tone; Scrambler Function - Albrecht Tectalk FM + Gebrauchsanweisung

radio.
Press " " Key again to exit volume setting and to return back
to frequency setting mode
Priority of PMR 446 during Broadcast Mode
Even when your radio is in broadcast mode, the radio still
monitors the PMR 446 frequency range for received calls or
signals. If an incoming PMR 446 signal is detected, the unit will
automatically switch to PMR mode & you can listen to
PMR446 transmissions.
If you do not press PTT to answer, the unit will auto switch back
to FM broadcast radio mode after the PMR 446 transmission
finished.
If you press PTT key to transmit, the unit will exit the FM
broadcast radio mode & stay on PMR446 mode now.
After finishing PMR communication, you can press "
again to re-enter the FM broadcast mode again. The unit will then
receive on the last FM broadcast radio frequency you had
selected before.

Call Tone

You can use Call Tones (melodies) to get the attention of other people
with radios on the same channel and CTCSS tone. You can also use
Call Tones as the signal of the start or end of a transmission.
Press " " key, LCD displays
transmitted to nearby receivers set at the same channel.
There are 10 different call tones to choose from.
the
" times
icon and your call tone will be
Selecting Call Tone
Press " " key four times, LCD display shows the
call tone number will flash,
Press " " or " " key to select your desired the call tone.
Press the "PTT" Key to confirm and quit
Or press " " key once, the last selection will be confirmed and
enter into next function selection.

Scrambler Function

You can enjoy privacy to talk within your group by selecting the same
scrambler setting as your group member does. There are 4 different
scrambler settings available)
Press " " Key 5 times, LCD display
Press " " or " " Key to select a scrambler setting from 1 to 4 .
OF means normal function = scrambler off.
Press PTT to confirm and quit.
Or press " " key once, the last selection will be confirmed and
enter into next function selection.
After turning on scrambler function, LCD will display
Please make sure that all other group members of Your PMR
network PMR use the scrambler function with the same setting.
It is normal, that all users must use the same radio model,
because different manufacturers may use different scrambling
methods, which are not compatible.
icon and
icon.
icon.
23