Vox (Hands-Free Function); Stop Watch; Baby Monitor; Roger Beep (On/Off) - Albrecht Tectalk FM + Gebrauchsanweisung

VOX (Hands-Free Function)

The unit has a built-in Voice Activated Circuit (VOX) function. You can
enjoy talking and listening without pressing PTT Key. You can use this
function preferably with an external earphone (please note that the
selected earphone must be suitable for VOX operation. Most Albrecht
earphones like AE 37 have a switch to select between PTT and VOX
mode)
To turn on VOX function
Press " " key six times, LCD displays the
VOX sensitivity digit display will flash.
Press" " or " " key to select of, 1, 2, 3 for OFF, Low, Medium &
High Sensitivity.
After turning on VOX, LCD will display
Press PTT to confirm and quit
Or press " " key once, the last selection will be confirmed and
enter into next function selection.
You can plug in the earphone for hands-free talking & listening.
Please speak close to the mic in order to activate 'VOX' function.
Make sure that the earphone is set to VOX mode (if equipped
with a switch) before it is plugged in!

Stop Watch

Press " " Key 7 times, LCD displays:
Press " " or " " Key to start and press "
stop..
And then press " " Key to reset.
icon and the
icon,
" or " " Key to
Lap Time
To get a lap time, press "
Press " " Key, it will stop to show the lap time while stop
watch is running.
Then press Key Lock Key again to switch back to stop watch
mode and show the running time.
Press " " or " " Key to stop and press "
Press " " Key 4 times to exist

Baby Monitor

This function can be used not only to monitor babies or handicapped
persons, but as well for acoustical monitoring of rooms. The function is
similar to VOX operation, but is especially adjusted for baby and sound
monitoring.
One radio is set to baby monitor mode, and another radio remains in
normal mode and is used to receive the transmissions of the baby's unit.
To activate one radio as Baby Monitor:
Press " " Key 8 times, LCD display will show the "Baby" icon.
Press " " or " " Key to monitor sensitivity level from 1 to 3 (low
to high level), OF is turn OFF this function.
Press PTT to confirm and quit.
Or press " " key once, the last selection will be confirmed and
enter into next function selection.
After turn on this function, LCD displays the "Baby" icon.

Roger Beep (ON/OFF)

The Roger Beep function enables a short tone signal which is
" or " " Key to start
" Key to reset.
24