Functional Description; Parts Description - Makita UR100D Betriebsanleitung

Tips for maintaining maximum
battery life
Charge the battery cartridge before completely
1.
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
Never recharge a fully charged battery car-
2.
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.

PARTS DESCRIPTION

Parts description (with nylon cutting
head)
Fig.4
1 Switch trigger
3 Lock lever
5 Nylon cutting head
7 Wire guard
9 Front grip
11 Indication lamp
Parts description (with plastic blade)
Fig.5
1 Switch trigger
3 Blade holder
5 Protector
7 Plastic blade
9
11
harness
13
2 Battery cartridge
4 Protector
6 Nylon cord
8
10
harness
12
2 Battery cartridge
4 Lock lever
6 Plastic blade head
8 Wire guard
10 Front grip
12 Indication lamp
- -
FUNCTIONAL
DESCRIPTION
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
start-up.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge. Failure to hold the tool and the battery
and result in damage to the tool and battery cartridge
Fig.6: 1. Red indicator 2. Button 3. Battery cartridge
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
not being inserted correctly.
Battery protection system
conditions:
Overloaded:
an abnormally high current.
the tool on to restart.
on again.
Low battery voltage:
again but stops soon. In this situation, remove and
recharge the battery.
12 ENGLISH