Special Functions - Klarstein 10032101 Bedienungsanleitung

EN
30

SPECIAL FUNCTIONS

Timer
Note: The timer can be used for all menus except menu 10 and 12. Only the baking
time of menu 10 can be changed using TIMER buttons (1:10; 1:20; 1:30).
1 First select the desired menu (MENU button), the bread weight (WEIGHT button)
and the browning level (BROWNING LEVEL button).
The following setting was selected: Menu 1, Bread weight
level (medium). The baking time on the display is [3:25].
2 Use buttons and to set the desired delay time. Each press of the button changes
the displayed time by 10 minutes. You can set a maximum time of 15 hours
(including baking time).
Example: Each button press changes the time on the display: 3:25 – 3:30 – 3:40 –
3:50 – 4:00 etc. If the bread is to be ready in 6 hours, press the TIMER button until 6:00
appears in the display
3 Start the programme by pressing the button. The colon on the display start flashing
and the set time counts down. The baking programme starts automatically when the
start of the baking time is reached.
Example: The displayed time is 6:00, the colon is flashing. When 3:25 is reached, the
baking programme starts automatically.
4 After the set period of time has elapsed, the bread is finished and the baking mould
can be removed from the appliance.
Example: After 6 hours incl. baking programme, the bread is finished. The display changes
to 00:00 and the keep-warm phase starts. You can take the bread out of the appliance
or leave it in the appliance during the keep-warm phase. At the end of the keep-warm
phase, the display returns to the original setting: Menu 1, Bread weight
Browning level (medium). The baking time on the display is [3:25].
(900g) and Browning
(900g) and