Assembling The Lp04 Profibus Dp - Aventics LP04 Betriebsanleitung

AVENTICS | PROFIBUS DP | R402000616–BDL–001–AF
1
Fig. 1: Bus coupler elements – Position of the DIP switches
1 Bus out, X7P1
2 Bus in, X7P2
3 Power supply, X1S
6 Assembling the LP04
PROFIBUS DP
Before a bus coupler can be connected to the PROFIBUS system,
an address must be assigned to it.
After removing the protective caps from the VS, the PROFIBUS
address can be adjusted in the range of 1–99 with two DIP
switches: SW1 and SW2; default address: 11.
Fig. 2: Position of the DIP switches (example 97)

Assembling the LP04 PROFIBUS DP

4 5
2 3
4 SW2
5 SW1
1
33
3
2