Intended Use; Improper Use - Aventics LP04 Betriebsanleitung

28 AVENTICS | PROFIBUS DP | R402000616–BDL–001–AF
Notes on Safety
O
Keep this documentation in a location where it is accessible
to all users at all times.
O
Always include the documentation when you pass the
product on to third parties.
2.2

Intended use

The product is an electropneumatic system component.
The product may be used as follows:
W
the device is only intended for use in industrial applications.
If the device is used in domestic applications (domestic,
business, and commercial applications), then a permit must
be obtained from the authorities or test office. These
permits are issued in Germany by the Regulation Authorities
for Telecommunications and Post (RegTP).
W
within the performance limits listed in the technical data.
The product is intended for professional use only.
Intended use includes having read and understood this
documentation, especially the chapter "Notes on Safety".
2.3

Improper use

Any use other than that described under Intended use is
improper and is not permitted.
If unsuitable products are installed or used in safetyrelevant
applications, this may result in unintended system operating
states that could lead to injuries and/or equipment damage.
Therefore, only use a product in safetyrelevant applications if
such use is specifically stated and permitted in the product
documentation. For example, in areas with explosion protection
or in safety-related components of control systems (functional
safety). AVENTICS GmbH is not liable for any damages resulting
from improper use. The user alone bears the risks of improper
use of the product.