Wireless Command Flash Mode; Master Flash Mode - Rollei 56 Gebrauchsanweisung

Wireless Command Flash Mode

60
The wireless flash system is composed by multiple wireless flashes . You can create a
wide variety of lighting effects .
Wireless command flash mode can be divided into:
MASTER flash mode and SLAVE flash mode .
MASTER flash mode can be divided into:
Wireless MASTER flash mode (E-TTL MASTER Canon)
Command MASTER flash mode (i-TTL MASTER Nikon)
SLAVE flash mode can be divided into:
Wireless SLAVE flash mode (E-TTL SLAVE c Canon)
Command SLAVE flash mode (i-TTL SLAVE n Nikon)
(Details please refer to the page 69)

MASTER Flash Mode

Press the button A to switch between the following modes: MASTER (Canon) /
MASTER (Nikon) /Slave Canon /Slave Nikon /Slave S1/Slave S2/Wireless closed
mode . The MASTER flash is used as main control unit and triggers the SLAVE flash
to realize off-camera TTL \ M \Multi flash to create different lighting effect .
Press the [MODE selection button] shortly to switch between E-TTL, I-TTL, M and
Multi when the flash is in MASTER mode .
ENGLISH