Multi Lighting Applications - Rollei 56 Gebrauchsanweisung

Multi Lighting Applications

72
1 . Wireless optical instrcution light
You can create two or three slave groups to meet the requirements of the
effects better and set the flash ratio for ETTL auto flash shooting of master as
well as manual flash output, frequency flash etc .
1 . Wireless flash of two slave units
Wireless option setting: SLAVE C and SLAVE N
Communication channel: 1,2,3,4
Group setting: Set one light as group A and the other light as group B
MASTER unit setting: Setting the communication channel
Set the flash ratio of master light ratio: A:B or A:B:C
2 . Wireless flash with three flashes
Wireless option setting: SLAVE c and SLAVE n
Channel setting: 1,2,3,4
Group setting: Set one light as group A, group B and group C
Setting MASTER unit: Setting each group's flash mode and output power
Setting master and shooting: Please select the ratio<A: BC> Press the test
button of the master flash to test whether the flash works normally . If the
flash does not fire, adjust the slave unit's angle towards the master unit as
well as the distance .
Note: If the ratio <RATIO A: B> is set, the flash of group C will not fire .
If the group of three flash light is set <A>, they will be controlled by the MASTER
flash light .
ENGLISH