Manual Tune - Toshiba 46WM48 Series Bedienungsanleitung

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be
connected to a VCR/decoder with a SCART lead or to tune-in a station on another System (see page 9).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 9.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Programme skip:
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 25.
Station: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on,
Press MENU and using S or R select the SET UP
1
menu, with Q highlight Manual tuning, press
OK to select.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
MENU Back EXIT Watch TV
Use P or Q to highlight the programme
2
position required e.g. we suggest Prog. 0 for
a VCR.
Manual tuning
Prog. Sys. Channel
0 I
1 I
2 I
3 I
4 I
5 I
Select
MENU Back

Manual tune

System Colour Programme
system skip
means nothing has been stored or the facility to skip the channel is ON. See page 11.
insert a pre-recorded tape in the VCR and press PLAY, then manually tune.
English
UK
OK
OK
OK
Station
60 VCR
22 BBC1
25 ITV
28 BBC2
32 CH4
69
EXIT Watch TV
Channel Search Manual fine
tuning
Press OK to select. If the programme is skipped,
3
Programme skip must be removed before
storing.
0 I A
Store MENU
Press R to select System and use P or Q to
4
change (if required, see page 9).
Then press R to select Search.
5
Press P or Q to begin the search, the television
6
will show the channel numbers.
0 I A
Store MENU
Each signal will show on the television, if it is not
7
your VCR, press P or Q again to restart the
search.
10
Station
Manual tuning
System
60 0 V C R
Back EXIT Watch TV
Manual tuning
Search
60 0
Back EXIT Watch TV