Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 46
The TV can be tuned-in manually using Manual tuning. For example: if the television cannot be connected
to a video/decoder with a Scart lead or to tune-in a station on another System (see page 9).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See step 4 on page 9.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 11.
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 21.
Station: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
Press MENU and using S or R select the SET UP
1
menu, with Q highlight Manual tuning, press
OK to select.
Language
Country
Auto tuning
Manual tuning
Programme sorting
MENU
Back
Use P or Q to highlight the programme
2
position required e.g. we suggest Prog. 0 for
a video.
Prog.
0
1
2
3
4
5
Select
MENU
Downloaded from
www.Manualslib.com

Manual tune

System
Colour
system
external source.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on,
insert a pre-recorded tape in the video and press PLAY, then manually tune.
SET UP
English
UK
EXIT
Watch TV
Manual tuning
Sys.
Channel
Station
I
60
VCR
I
22
BBC1
I
25
ITV
I
28
BBC2
I
32
CH4
I
69
Back
EXIT
Watch TV
manuals search engine
Programme
Channel
Search
skip
Press OK to select. If the programme is skipped,
3
Programme skip must be removed before
storing.
0
Store
OK
OK
Press R to select System and use P or Q to
4
OK
change (if required, see step 4 on page 9).
Then press R to select Search.
5
Press P or Q to begin the search.
6
Search will appear and the television will show
the channel numbers.
0
Store
Each signal will show on the television, if it is not
7
your VCR, press P or Q again to restart the
search.
10
Manual fine
Station
tuning
Manual tuning
System
I
A
60
0
V C R
MENU
Back
EXIT
Watch TV
Manual tuning
Search
I
A
60
0
MENU
Back
EXIT
Watch TV
Continues on the next page

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis