Abus TVIP20000 Kurzanleitung Seite 14

4. Connections
4.1 Connect the network camera to the network.
4.2 Please use a network cable (CAT5) to connet the camera to any Hub or Switch. The camera will
detect the connected device automatically. If the camera is connected directly to any PC or Notebook,
then the send and receive channels will be automatically exchanged. There is no need for a so called
Cross-Link-Cable.
For the initial setup you can use the supplied network cable out of the camera package.
4.3 Please connect now the supplied power supply to camera and 230VAC power socket.
14
English