Abus TVIP20000 Kurzanleitung Seite 13

Focus ring: To change the focus turn the focus ring left or right, until the best image sharpness is setup.
Power LED: This LED is turned on in normal camera working status.
Network LED: This LED is flashing on network communication.
Integrated microphone: Recording of audio signals
Alarm input/output: One relay output (MOSFET relay), one sensor input (please refer to the drawing below).
Ethernet connector: To connect the camera to the network using RJ45 connector.
Audio output: Connection of loud speakers
Audio input: Connection of an external microphone
Reset: Manual restart or reset to default settings. Please see the table below.
Power connector: Connection for 12 VDC power supply
Antenna: Used to establish a wireless network connection (WLAN 802.11 b/g)
Camera reset:
Push the reset button once
Push the reset button for 10 seconds
Alarm input / output
Camera will be restarted
The camera will be reset to default settings
13
English