Software; Installation - Busch-Jaeger 6136/100M-101 Bedienungsanleitung

ENG
9

Software

9.1

Installation

ETS 1. Install the panel commissioning software from the current EIB database on a PC.
(from V. 2. Import the product database into the ETS.
1.3)
3. Configure the unit and set the parameters.
Power- 1. Install the panel commissioning software from the current EIB database or from the Power-
Projekt 4.x Projekt CD.
2. Configure the unit and set the parameters (see above).
The EIB database can be purchased directly from Busch-Jaeger or downloaded from the
Internet at www.busch-jaeger.de.
42