For Your Safety; Technical Information - Spit F40 Bedienungs- Und Wartungsanleitung

For your safety

Non-observance of the safety instructions and the prescriptions
regarding the prevention of accidents will occur the risk of injury!
See enclosure for further safety instructions!

Technical information

Characteristics
6
Please observe the general drawing and explanations on the inner cover!
This machine can be operated safely only when the operating
instructions have been completely read and strictly observed to. It is
recommended to receive practical instruction before using the
machine for the first time.
Always inspect cable and plug before using the machine. Have damage
repaired only by a qualified professional.
In order to avoid any risks, the connecting cable - if damaged - has to be
replaced by the manufacturer or his agency.
The machine must not be used when damp and must not be operated in
wet environment.
Use safety glasses, ear protectors, dust protection mask as well as wear
protective gloves and safety shoes.
While operating hold the machine with both hands and ensure a safe stand
(e. g. not on a ladder).
Materials releasing noxious dust or steam during the work may not be treated
(e. g. asbestos).
The dust generated when working is detrimental to health: wear dust mask
and protective goggles.
Beware of electric lines, gas and water pipes embedded in walls and be
careful when cutting slots in structural walls (danger of collapse).
The decelerating tools must no be braked. Do not touch rotating tools.
Wait to lay the machine down until the cutter disks stopped turning.
Insert plug in power supply socket only when machine is switched off.
Application of extension cords: Wind off the cable drum completely; a
sufficient cable diameter is essential!
Only use genuine accessories.
Tool fixing ...................................................acme treat 14 x 4 mm
Voltage..................................................................... 220 - 240 V
Frequency ........................................................................ 50 Hz
Amperage ........................................................................... 5 A
Power input .................................................................. 1050 W
Speed I ........................................................................700 min
Speed II .....................................................................1300 min
Weight..............................................................................6.1 kg
Dimensions (mm) ...................................................370 x 250 x 130
Cable length ........................................................................ 4 m
Carbons............................................................ self disconnecting
Lubrication .........................................................grease lubrication
Speed regulation ............................................. with control electrics
Class II.................................................................................
-1
-1