Set Up - Dell 1800MP Benutzerhandbuch

SET UP

P M —Select how the image appears:
ROJECTOR ODE
• Front Projection-Desktop (the default).
• Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so you can
project from behind a translucent screen.
• Rear Projection-Ceiling Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with a
ceiling-mounted projection.
A R —Select an aspect ratio to adjust how the image appears.
SPECT ATIO
• 1:1 — The input source displays without scaling.
Use 1:1 aspect ratio if you are using one of the following:
– VGA cable and the computer has a resolution less than XGA (1024 x 768)
– Component cable (576p/480i/480p)
– S-Video cable
– Composite cable
• 16:9 — The input source scales to fit the width of the screen.
• 4:3 — The input source scales to fit the screen.
Use 16:9 or 4:3 if you are using one of the following:
– Computer resolution greater than XGA
– Component cable (1080i or 720p)
P I —Press to show the projector model name, the present resolution,
ROJECTOR NFO
and projector serial number (PPID#).
22 Using Your Projector
V. K —Adjust image
EYSTONE
distortion caused by
tilting the projector.