Manufacturer's Warranty - Hilti TE 40 Bedienungsanleitung

Trouble or fault
Combihammer does not
achieve full power.
Drill bit does not rotate.
Drill bit is not released.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Disposal of electric tools or appliances together with household waste is not permissible.

10 Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
18 English
Printed: 17.03.2017 | Doc-Nr: PUB / 5070952 / 000 / 02
Possible cause
The voltage provided by the elec-
tric supply is too low.
The function selector switch is not
engaged or is in the "Chiseling"
position or the "Chisel position-
ing" position .
Chuck not pulled back fully.
Side handle not fitted correctly.
Action to be taken
▶ Connect the combihammer to a
different electric supply.
▶ Set the function selector switch
to one of the following positions:
.
▶ Pull the chuck back as far
as it will go and remove the
accessory tool.
▶ Disengage the side handle and
refit it correctly so that the
clamping band and side handle
engage in the recess.