Miele DSM 400 Montageanweisung Seite 32

en - Electrical connection
The potential free contact on the DSM
400 a can, for example, be used in a
cooker hood with an external motor
...EXT, which is connected to a central
ducting system.
The contact can then be used to
operate an electrically driven non-return
flap b which is connected to the
central extraction unit c.
The non-return flap must be suitable for
use with a potential free contact.
The suction power depends on the
motor used and on the construction of
the ducting system. It is not controlled
via the cooker hood controls.
32
Components used in the central
ducting system are not supplied by
Miele.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe registered installer must be
sought.