Potential Free Contact - Miele DSM 400 Montageanweisung

en - Electrical connection

Potential free contact

(connection must be made a suitably
qualified electrician only)
30
^ Before making the connection the
control module lid has to be taken off.
It is refitted later.
Potential free contact can be made
using terminal c on the control module.
This enables another appliance to be
controlled according to the switch
setting on the cooker hood fan.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe registered installer must be
sought.
^ Terminal a must be bridged.
Contact c supplies no defined voltage
(it is potential free). It can be used
universally.
The maximum operating capacity of the
contact is 230 V / 2 (1) A.
The contact closes when the On/Off
control on the cooker hood is operated.
The On/Off control indicator light and
the second indicator light for the fan
setting will come on.