de - Funktionsbeschreibung Das Steuermodul bietet folgende Mög- lichkeiten: 1. Anschluss eines Lichttasters Darüber hinaus bietet das Steuermodul die Möglichkeit, über einen in die Haus- installation integrierten Lichttaster die Beleuchtung der Dunstabzugshaube zu schalten. 2. Potentialfreier Anschluss Er dient zum Steuern eines anderen Gerätes in Abhängigkeit vom Schaltzu- stand des Gebläses der Dunstabzugs- haube.
de - Montage Wand-Dunstabzugshaube Die Dunstabzugshaube vom Stromnetz trennen. DA 249-4, DA 252/9-4, ^ Kamin und Teleskop demontieren. DA 269/79-4, Beachten Sie dazu die Montagean- DA 396/9-5 weisung der Dunstabzugshaube. DA 402/6/7/9, DA 416/9-4, ^ Die vorgesehenen Komponenten an- DA 422/6/8/9-4, schließen (siehe Kapitel "Elektrischer DA 439, Anschluss"...
Seite 6
de - Montage DA 289-4, DA 489, DA 489-4 Zur Montage des Steuermoduls ist ein Trägerblech erforderlich. Es ist als nachkaufbares Zubehör erhältlich (M.-Nr. 8363350). Die Dunstabzugshaube vom Stromnetz trennen. ^ Schwadenschirm, Kamin und Tele- skop demontieren. Beachten Sie dazu die Montageanweisung der Dunstabzugshaube.
de - Montage Insel-Dunstabzugshaube Die Dunstabzugshaube vom Elektronetz trennen. dai2805c ^ Das Anschlusskabel des Steuermo- duls in die rechte Buchse an der Dunstabzugshaube stecken. ^ Den Abdeckrahmen nach unten ab- ziehen. ^ Die vorgesehenen Komponenten am Steuermodul anschließen (siehe Ka- pitel "Elektrischer Anschluss"...
de - Montage Flachschirmhaube DA 3150/60/90 (2011), DA 3460/90 DA 3150/60/90...
Seite 9
de - Montage Die Dunstabzugshaube vom Elektronetz trennen. ^ Die vorgesehenen Komponenten am Steuermodul anschließen (siehe Ka- pitel "Elektrischer Anschluss" und "Schaltplan"). An der Oberseite der Dunstabzugshau- be befindet sich der Anschlusssockel für das Steuermodul. ^ Das Steuermodul auf den Sockel schrauben.
de - Montage Lüfterbaustein Die Dunstabzugshaube vom DA 2150, 2170, 2250, 2270, 2210 Elektronetz trennen. ^ Die vorgesehenen Komponenten am Steuermodul anschließen (siehe Ka- pitel "Elektrischer Anschluss" und "Schaltplan"). ^ Das Steuermodul mit den beiliegen- den Schrauben am Gehäuse der Dunstabzugshaube befestigen.
de - Montage ^ Die vorgesehenen Komponenten am Deckenlüfter Steuermodul anschließen (siehe Ka- DA 2900, DA 2905 pitel "Elektrischer Anschluss" und Die beschriebene Installation des "Schaltplan"). DSM-Moduls erfolgt während der Mon- ^ Die Dunstabzugshaube, wie auf dem tage der Dunstabzugshaube. Beachten Montageblatt beschrieben, vorberei- Sie dazu die Gebrauchsanweisung und ten.
Seite 12
de - Montage ^ Die Dunstabzugshaube, wie auf dem ^ Die Montage der Dunstabzugshaube, Montageblatt beschrieben, in der De- wie auf dem Montageblatt beschrie- cke befestigen. ben, abschließen. Achten Sie auf eine fachgerechte Verlegung der Anschlussleitung und der Leitungen der angeschlossenen Komponenten.
de - Elektrischer Anschluss ^ Zum Anschließen ist der Deckel des Zusatzlichttaster Steuermoduls abzunehmen und (Anschluss nur durch eine Elek- nachher wieder zu montieren. tro-Fachkraft) ^ Am mittleren Anschluss b des Steu- ermoduls lässt sich ein in der Ge- bäudeinstallation integrierter Lichttas- ter anschließen.
Seite 14
de - Elektrischer Anschluss ^ Flachschirmhaube und Lüfterbau- stein: Die Erdungsleitung zwischen Steuer- modul und Gerätegehäuse ist anzu- schließen. Nach der Installation aller Bauteile hat eine Sicherheitsprüfung gemäß der örtlichen Vorschriften zu erfol- gen (z.B. VDE 0701-1). DA 2150/70, DA 2250/70/10 DA 3150/60/90 DA 3150/60/90 (2011), DA 3460/90...
de - Elektrischer Anschluss ^ Zum Anschließen ist der Deckel des Potentialfreier Kontakt. Steuermoduls abzunehmen und (Anschluss nur durch eine Elek- nachher wieder zu montieren. tro-Fachkraft) Der Anschluss c des Steuermoduls bietet einen potentialfreien Kontakt. Er kann z.B. dazu genutzt werden, andere Geräte in Abhängigkeit vom Schaltzu- stand des Gebläses der Dunstabzugs- haube zu steuern.
Seite 16
de - Elektrischer Anschluss ^ Flachschirmhaube und Lüfterbau- stein: Die Erdungsleitung zwischen Steuer- modul und Gerätegehäuse ist anzu- schließen. Nach der Installation aller Bauteile hat eine Sicherheitsprüfung gemäß der örtlichen Vorschriften zu erfol- gen (z.B. VDE 0701-1). DA 2150/70, DA 2250/70/10 DA 3150/60/90 DA 3150/60/90 (2011), DA 3460/90...
Seite 17
Lieferprogramms. Ziehen Sie in jedem Fall den Rat des zuständigen Schornsteinfegermeis- ters hinzu. Der potentialfreie Kontakt des DSM 400 a kann zum Beispiel in einer Dunstab- zugshaube der Baureihe ...EXT einge- setzt werden, die an eine Zentralabsau- gung angeschlossen ist.
en – Installation - Operation The control module enables the following: 1. Connection to a pushbutton light switch The control module can also be used to switch the cooker hood lighting on via a pushbutton light switch in the house. 2.
en - Installation Wall mounted cooker hoods Disconnect the cooker hood from the mains electricity supply. DA 249-4, DA 252/9-4, ^ Dismantle the tower and the DA 269/79-4, telescopic extention piece. Follow the DA 396/9-5 separate installation instructions DA 402/6/7/9, supplied with the cooker hood.
Seite 21
en - Installation DA 289-4, DA 489, DA 489-4 A fixing bracket is required for fitting the control module. This is available as an optional accessory (M.-Nr. 8363350). Disconnect the cooker hood from the mains electricity supply. ^ Dismantle the canopy, tower and the telescopic extention piece.
en - Installation Island cooker hoods Disconnect the cooker hood from the mains electricity supply. dai2805c ^ Connect the control module cable to the right hand socket in the cooker hood. ^ Pull the cover plate downwards. ^ Connect all components to the control module as described in "Electrical connection"...
en - Installation Deflector plate cooker hoods DA 3150/60/90 (2011), DA 3460/90 DA 3150/60/90...
Seite 24
en - Installation Disconnect the cooker hood from the mains electricity supply. ^ Connect all components to the control module as described in "Electrical connection" and "Wiring diagram". The control module connects to the top of the cooker hood. ^ Screw the control module onto the two pillars.
en - Installation Integrated cooker hoods Disconnect the cooker hood DA 2150, 2170, 2250, 2270, 2210 from the mains electricity supply. ^ Connect all components to the control module as described in "Electrical connection" and "Wiring diagram". ^ Using the screws supplied secure the control module to the cooker hood casing.
en - Installation ^ Connect all components to the Ceiling mounted cooker hood control module as described in DA 2900, DA 2905 "Electrical connection" and "Wiring Installation of the DSM module as diagram". described here is carried out while the ^ Prepare the cooker hood as cooker hood is being installed.
Seite 27
en - Installation ^ Secure the cooker hood in the ceiling ^ Complete the installation of the as described in the installation cooker hood as described in the diagram. installation diagram. Ensure that the connection cable and the cables of the connected components are positioned correctly.
en - Electrical connection ^ Before making the connection the Additional pushbutton light control module lid has to be taken off. switch It is refitted later. (connection must be made a suitably ^ Connection can be made to a qualified electrician only) pushbutton light switch ("door bell"...
Seite 29
en - Electrical connection ^ Deflector plate and integrated cooker hoods: Connect the earth wire between the control module and the appliance casing. After the installation is completed, a safety check must be carried out in accordance with national and local regulations.
en - Electrical connection ^ Before making the connection the Potential free contact control module lid has to be taken off. (connection must be made a suitably It is refitted later. qualified electrician only) Potential free contact can be made using terminal c on the control module.
Seite 31
en - Electrical connection ^ Deflector plate and integrated cooker hoods: Connect the earth wire between the control module and the appliance casing. After the installation is completed, a safety check must be carried out in accordance with national and local regulations.
Seite 32
- Electrical connection Components used in the central ducting system are not supplied by Miele. If in any doubt, the advice of a competent builder or, for gas, a Gas Safe registered installer must be sought. The potential free contact on the DSM...