Miele DSM 400 Montageanweisung Seite 21

DA 289-4,
DA 489,
DA 489-4
A fixing bracket is required for fitting
the control module. This is available as
an optional accessory (M.-Nr.
8363350).
,
Disconnect the cooker hood
from the mains electricity supply.
^ Dismantle the canopy, tower and the
telescopic extention piece. Follow the
separate installation instructions
supplied with the cooker hood.
^ Fit the bracket to the motor unit as
shown.
^ Connect all components as
described in "Electrical connection"
and "Wiring diagram".
^ Then secure the control module to
the bracket.
^ Plug the connection cable into the
socket on the motor unit.
Ensure that the connection cable
and the cables of the connected
components are positioned
correctly. They should not be kinked
or squashed.
^ Finally re-connect the cooker hood to
the mains electrical supply and then
re-assemble the canopy, the
telescopic extension piece and the
tower.
en - Installation
21