En - Installation; Wall Mounted Cooker Hoods - Miele DSM 400 Montageanweisung

Wall mounted cooker hoods

DA 249-4,
DA 252/9-4,
DA 269/79-4,
DA 396/9-5
DA 402/6/7/9,
DA 416/9-4,
DA 422/6/8/9-4,
DA 439,
DA 446/7/9,
DA 5190 W,
DA 5294 W,
DA 5320/30/90 W,
DA 5495 W,
DA 5690 W,
DA 5960/90 W,
DA 6190 W,
DA 6290 W,
DA 6390 W,
DA 6590/20 W
,
Disconnect the cooker hood
from the mains electricity supply.
^ Dismantle the tower and the
telescopic extention piece. Follow the
separate installation instructions
supplied with the cooker hood.
^ Connect all components as
described in "Electrical connection"
and "Wiring diagram".
^ Using the screws supplied secure
the control module to the side of the
cooker hood's electronic unit.
^ Plug the connection cable into the
socket on the electronic unit.
^ Arrange the cable as shown and clip
it into the cable clips provided.
Ensure that the connection cable
and the cables of the connected
components are positioned
correctly. They should not be kinked
or squashed.
^ Finally re-connect the cooker hood to
the mains electrical supply and then
re-assemble both the telescopic
extension piece and the tower.

en - Installation

19