If you cannot connect wirelessly to the P-661HNU-Fx, check
that you have selected the correct SSID and entered the
correct security key. If that does not work, ensure that the
WLAN/WPS LED on the front panel is turned on.
Setting Up a Wireless Connection using WPS
Follow these steps to add a WPS-enabled device to the wireless network
using the WLAN/WPS button.
You must use WPS one device at a time with the P-661HNU-Fx.
Place the devices you want to connect
1
near one another.
2
Press the WLAN/WPS button on top of
the P-661HNU-Fx for more than 5
seconds to turn the WPS function on or
off.
The WLAN/WPS light blinks.
Press the WPS button on a compatible
3
device within 2 minutes of pressing the
button on the P-661HNU-Fx.
The WLAN/WPS light on the P-
661HNU-Fx shines steadily when
connected.
ENGLISH
9