JVC KW-NT30 Bedienungsanleitung Seite 67

Menu items
Amplifier Gain
Dimmer
Dimmer Time
Brightness
Illumination Colour
Display Colour
Wallpaper
Clock on Video/Screen-Off
Off-axis Viewing
Demonstration
Front Aux Input
* Not selectable when the input is selected as the source.
Selectable settings
You can change the maximum volume level of this unit.
High: VOL 0 to 20 (for guidance)/VOL 00 to 50 (for audio)
Low: VOL 0 to 15 (for guidance)/VOL 00 to 30 (for audio)
(Select this if the peak power of the speakers is less than 50 W.)
Off: Deactivates the built-in amplifier (VOL 0 to 20 for guidance/VOL 00
to 50 for audio.)
• If you change this setting from <High>/<Off> to <Low> while
the volume level is set higher than the maximum level of <Low>,
the unit automatically lowers the volume level (guidance: VOL 15/
audio: VOL 30).
Off: Cancels.
On: Activates dimmer.
Auto: Dims the screen and the button illumination when you turn on
the headlights.
• The illumination control lead connection is required. (☞
Installation/Connection Manual)
Time: Activates the Dimmer Time setting below.
Sets the Dimmer On/Off times.
Adjust the display brightness.
–5 to +5; Initial +5
☞ page 64
Select the colour of the bars and buttons on the touch panel.
Select the display background from one of five choices. Press 5/∞ to
select a background and press [OK].
On: The clock time is displayed while video source is played back or the
screen is turned off.
Off: Cancels.
Select <On> if the screen is hard to see due to the installation angle or
position.
On, Off
This setting will be deactivated and disappear from the menu when the
System detects the first car movement.
On, Off
On: Select when connecting an audio component to the AUX input
terminal on the monitor panel.
Off *: Select when no audio component is connected ("Front AUX" is not
selectable).
67
AV menu items
Initial: Underlined
Continued on the next page