JVC KW-V51BT Bedienungsanleitung Seite 56

REFERENCES REFERENCES
Videos cannot be played.
• Connect with USB Audio and Video cable JVC
KS-U59 for iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5 or JVC KS-U60 and USB2.0
cable through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable JVC
KS-U59 for iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5 or JVC KS-U60 and USB2.0
cable through a Lightning-Digital AV adapter
for iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5. Other
cables cannot be used.
Tuner
SSM automatic presetting does not work.
• Store stations manually. (Page 21 )
Static noise while listening to the radio.
• Connect the aerial firmly.
AV-IN
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
56
Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 28)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated on its instructions, try "0000" or "1234."
• Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume or noise reduction
volume. (Page 30)
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.