Sound Adjustment; Using The Sound Equalization - JVC KW-V51BT Bedienungsanleitung

SETTINGS SETTINGS

Sound adjustment

Using the sound equalization

• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/AAC
• You cannot adjust the sound when the AV source
is turned off.
Selecting a preset sound mode
1
Display the <Equalizer> screen.
On the Home screen:
• You can also display the <Equalizer> screen
] on the <Function Menu>
by pressing [
screen. (Page 7)
2
Select a sound mode.
• You can change the page to display more
items by pressing [J]/[K].
36
Storing your own adjustment—Customizing
preset sound mode
1
Select a sound mode. (See the left column.)
2
Adjust the level of each band (1), then
select the subwoofer level (2).
The adjustments are stored and <User> is
activated.
• To finish the procedure, press [
Storing your own adjustment—Adjusting the
sound precisely
1
Select a sound mode. (See the left column.)
2
Display the adjustment screen.
3
Select a band.
4
Adjust the sound.
[Reset]
<Freq>
<Q>
<Bass>
<SW Level>
].
The adjustments are overwritten if the <User>
setting has been created (see the left column),
and <User> is activated.
• To finish the procedure, press [
• The adjustments are memorized until you adjust
sound again.
• To make adjustment for other bands, repeat steps
3 and 4.
* Fixed for "High" band.
1
*
2 Only for "Low" band.
Changes the level of each band
to 0.
Selects frequency.
Adjusts the width of the
frequency.*
1
Activates/deactivates bass.*
2
Adjusts subwoofer level.
].