Yamaha TDW-120 Bedienungsanleitung Seite 23

To raise a pitch by a pure major 3rd or a
pure minor 3rd, adjust the tuning so that
the meter needle will point to the pure
major or minor 3rd mark respectively. For
example, if you want to raise the note of A
(0 cent) by a pure major 3rd, first tune your
instrument so that the display will indicate
the note name C#, then fine-tune the
instrument so that the meter needle will
point the down arrow ▼ (–13.7 cents) on
the left side of the meter. If you want to
raise the note of A (0 cent) by a pure minor
3rd, tune your instrument so that the
display will indicate note name C, then
fine-tune the instrument so that the meter
needle will point the up arrow ▼ (+15.6
cents) on the right side of the meter.
Sound-out mode
In this mode, you can tune your instrument by
referring to the oscillator sound at the reference
pitch (output from the speaker of the Tuner).
1. Press the [SOUND] button to engage
sound-out mode.
2. Press the [SOUND UP] or [SOUND DOWN]
button to select the name of the note that
you want to tune to.
You can select a pitch in the range of C4
(261.63Hz) to C5 (523.25Hz).
12NOTE: C4 › C 4 › D4 › D 4 › E4 › F4 › F 4 › G4 ›
G 4 › A4 › A 4 › B4 › C5
3. Tune your instrument while referring to the
oscillator sound at the reference pitch
output from the Tuner.
4. To exit Sound-out mode, press the [SOUND]
button.
23