Installing Batteries - Yamaha TDW-120 Bedienungsanleitung

Transmitter

Installing batteries

Before you install or replace the batteries
on your Tuner or Transmitter, be sure to
turn off the power to both the transmitter
as well as the tuner. The batteries that are
included are intended to allow you to
check functionality and may have a short
life.
If the batteries for the Tuner or Transmitter are
low on power, the Tuner low battery indicator
will appear on the LCD display of the Tuner.
Both units will continue to work for a while,
but tuning may not be accurate. Please replace
the batteries with new ones as soon as possible.
Power LED
[POWER] button
Installing batteries in the Tuner
1. Gently press down and slide the battery
case cover on the rear panel of the Tuner to
remove it.
2. Properly orient the batteries and insert
them into the unit.
(AA Alkaline batteries recommended)
3. Reattach the battery cover on the Tuner.
Please don't charge an alkaline battery.
Installing batteries in the Transmitter
CR2032 batteries that are compatible with the
Transmitter
CR2032 batteries made by Panasonic
17