Yamaha TDW-120 Bedienungsanleitung Seite 21

When the transmission of the ID data from the
Transmitter to the Tuner is complete, the ID
indicator will light up on the LCD.
4. After the ID data is transmitted, remove the
Transmitter from the Tuner.
The ID indicator on the LCD will turn off.
If multiple Wi-Tune units are used in the
same location, the tuning meter may not
respond to the proper instrument, or an
incorrect note name may be displayed.
In such cases, resetting the ID will
restore communication between the
Transmitter and Tuner.
If there is no input sound for 20 minutes
while the Transmitter is turned on, or if
the Transmitter and Tuner cannot
communicate with each other for two
minutes, the power will automatically
be turned off.
Turning the power on and off
1. Press the [POWER] button on the Tuner and
Transmitter to turn the power on and off.
If there is no input sound for 20 minutes while
the Tuner is turned on, the power will
automatically be turned off.
Backlight
1. Press the [BACK LIGHT] button. The LCD
backlight will turn on.
Pressing the [BACK LIGHT] button will turn
the LCD backlight on and off.
Wireless tuning
Once the power to the Tuner and Transmitter is
turned on and communication becomes
possible, the built-in microphone of the Tuner
will turn off, enabling you to use the wireless
function. At this time, the wireless indicator
will appear on the LCD.
21