Troubleshooting - Klarstein 10032455 Bedienungsanleitung

EN
38

TROUBLESHOOTING

Gas leaking from
cracked/cut/burned hose
Gas leaking from LP tank
Gas leaking from
LP tank valve
Gas leaking between
LP tank and regulator
connection
Fire coming through
control panel
Burner will not light
using ignitor
(Gas issues)
Damaged hose
Mechanical failure due
to resting or mishandling
.Failure or tank valve
from mishandling or
mechanical failure
Improper installation,
connection not tight,
failure of rubber seal
Fire in burner tube
section of burner due
to partial blockage
Trying to light
wrong burner
Burner not engaged
with control valve
Obstruction in burner
Turn off gas at LP tank,
if hoes is cut or cracked,
replace hose.See LP tank
lead test and connection
regulator to the LP tank
Turn off LP tank valve
Turn off LP tank
valve. Return LP tank
to gas supplier
Turn off LP tank valve,
remove regulator from
cylinder and visually
inspect rubber seal for
damage, see LP tank
test and connection
regulator to the LP tank
Turn off control knobs
and LP tank valve. After
fire is out and grill is
cold, remove burner
and inspect for spider
nests or rust. see natural
hazard and cleaning the
burner assembly pages.
See instructions on control
panel and section in
the Use and Care.
Make sure valve are
positioned inside
of burner tubes.
Ensure burner tubes
are not obstructed with
spider webs or other
matted, see cleaning
section of use and care