Dcp - Fiat CLARION PU2312 Bedienungsanleitung

4. DCP

The control panel can be detached to pre-
vent theft. When detaching the control
panel, store it in the DCP (DETACHABLE
CONTROL PANEL) case to prevent
scratches.
We recommend taking the DCP with you
when leaving the car.
Removing the DCP
1. Hold down POWER button 3 for 1 sec-
ond or longer to switch off the power.
2. Deeply push in the DCP Release button
1.
DCP Release button 1
3. Remove the DCP.
DCP
Attaching the DCP
1. Insert the right side of the DCP into the
main unit.
2. Insert the left side of the DCP into the
main unit.
2.
6
1.
éCAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful
not to drop it or subject it to strong
shocks.
• When the Release button is pressed
and the DCP is unlocked, the car's
vibrations may cause it to fall. To pre-
vent damage to the DCP, always store
it in its case after detaching it. (See fig-
ure below).
DCP case
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, screw-
drivers, etc.
Note:
•
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.