Upnp - Abus TCIP41660 Bedienungsanleitung

English

12.3.2.6. UPnP™

The UPnP (Universal Plug and Play) function makes it easy to control network devices in an IP
network. This allows the network camera to be seen in the Windows network environment (e.g. as a
network device).
Enable UPnP™
For enabling or disabling the UPnP function.
Friendly Name
Display of the MAC address of the camera
Port Mapping
Enable Port Mapping
This enables Universal Plug and Play port forwarding for network services. If your router supports
UPnP, then port forwarding for video streams is enabled automatically on the router for the network
camera using this option.
Port Mapping Mode
Select here whether you wish to conduct port mapping automatically or manually.
Protocol Name:
HTTP
The default port for HTTP transmission is 80. As an alternative, this port can be assigned a value in
the range 1025 ~ 65535. If several IP cameras are located on the same subnetwork, each camera
should have its own unique HTTP port
RTSP
The default port for RTSP transmission is 554. As an alternative, this port can be assigned a value in
the range 1025 ~ 65535. If several IP cameras are located on the same subnetwork, each camera
should have its own unique RTSP port.
Server Port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. As an
alternative, this port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are
located in the same subnetwork, each camera should have its own unique server port.
110