Wiseup AT003 Bedienungsanleitung Seite 2

III. Preparation of Camera
3.1. Make sure that a micro SD card which has been formatted in advance has been insert-
ed into the SD card slot of the camera. The internal memory of this SD card cannot exceed
64GB and we suggest you use the Micro SDHC Class 10 card only.
3.2 Connect the camera to an external power source, the power indicator light and the
charging indicator light will be solid on and the camera will be turned on automatically.
IV. P2P Network Configuration (LAN Mode)
4.1 power on the camera, when the WIFI pilot lamp flashes slowly, which means the WIFI
hotspot of camera has been on and ready.