Volkpool ECO 5 Bedienungsanleitung Seite 7

3.2 Siting of the Heat Pump
The appliance will operate properly in any location, provided that three
points are observed:
1. Fresh Air
The appliance may be installed practically anywhere outside, as long as
minimum distances to other objects are observed
.
3.3 Distance from the Swimming Pool
Install the heat pump as close as possible to the swimming pool in order
to limit heat loss through the pipes.
Ensure a firm base and place the heat pump on the rubber blocks to
avoid vibration. All exposed pipework is to
be insulated to avoid heat loss.
- 2. Electricity - 3. Swimming pool filters
CAUTION:
Do not place the appliance in
an enclosed space with
restricted volume of air where
the air expelled would be
re-used, or near to shrubbery
that might block the air inlet.
These locations hinder the
continuous flow of fresh air,
resulting in a reduction in
efficiency and possibly
obstructing adequate supply
of heat.
See diagram for the
minimum distances.
- 4 -