SOPRO COMEG SYMBIOZ Led Betriebsanleitung Seite 25

12
12.3 Recommended distances between reportable and mobile communication systems and this product
The equipment referenced "LED Source" has been designed to be used in an electromagnetic environment in which the RF interfe-
rence emitted is controlled. The user of this device can help to prevent electromagnetic interference by keeping a minimum distance
between the of portable and mobile RF communications systems (transmitters) and this device, as recommended below, as a function
of the maximum output power of the communications system.
Maximum output power Separation distance as a function the transmitter frequency
assigned of the transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
in W
d = 1,16 √ P
0.01 0.116
0.1 0.366
1 1.16
10 3.66
100 11.6
Remark 1: At 80 MHz and 800 MHz, it is appropriate to use the highest frequency band.
Remark 2: These recommendations may not be applicable to all situations. The propagation of electromagnetic waves is modified by
the absorption and reflection due to the structures, objects, and people. For transmitters whose maximum output power is not listed
on the table above, the recommended separation distance d, in metres (m) can be established using the equation applicable to the
frequency of the transmitter, in which P is the maximum output power of the transmitter in watts (W) assigned by the manufacturer
of the transmitter.
ELECTRO-MAGNETIC
COMPATIBILITY
d = 1,16 √ P
0.116
0.366
1.16
3.66
11.6
d = 2,33 √ P
0.233
0.736
2.33
7.36
23.3
- 25 -