Gasrequirements - Sunred SFT15 Anleitung

HEATER STAND AND PLACE

Gasrequirements:

Use LPG gas mixtures.
-
- Maximum inlet pressure of propane regulator must not exceed 100 PSI.
The pressure regulator and hose assembly to be used must conform to local standard
-
codes.
The installation must conform to local codes, or in the absence of codes, with standard
-
codes.
The installation must conform to local codes, or in the absence of codes, with the
-
standard for storage and handling of liquid petroleum gases.
A dented, rusted or damaged propane tank may be hazardous and should be checked by
-
your tank supplier.
Never use a propane tank with a damaged valve connection.
-
The propane tank must be arranged to provide for vapor withdrawal from the operating
-
cylinder.
- Never connect an unregulated propane tank to the heater.
HEATERS STANDPLACE AND LOCATION
The heater is primarily for outdoor use only.
-
Always ensure that adequate fresh air ventilation is provided.
-
Always maintain proper clearance to combustible materials, i.e. top 45cm(18") and sides
-
70cm (28") minimum.
- Heater must be placed on level firm ground.
- Never operate heater in an explosive atmosphere like areas where gasoline or other
flammable liquids or vapours are stored.
- To protect heater from strong wind, it its possible to anchor the base securely to the
ground with screws.
www.sunred.nl