Teac T-R610 Bedienungsanleitung Seite 14

5 Set the stop time minutes by using the TUNING buttons
(‡/°), and press the ENTER button.
SLEEP
AM
FM
TIMER
SLEEP
AM
FM
TIMER
6 Select a source by using the TUNING buttons (‡/°),
and press the ENTER button.
Each time the TUNING buttons (‡ or °) are pressed, the
source is changed as follows:
CD TAPE
< Do not select "CD", "TAPE" or "TUNER-R", if your CD player
or cassette tape deck connected to the A-R610 does not
support timer controlled playback/recording.
Now the timer setting is stored in memory.
14
Setting the Daily Timer 2
RDS TUNED
RT STEREO
PTY MEMORY
CH. SIGNAL
RDS TUNED
RT STEREO
PTY MEMORY
SIGNAL
CH.
TUNER R(ecording) TUNER
7 Press the TIMER button.
SLEEP
AM
FM
TIMER
The timer indicator lights on the display.
8
Prepare for timer operation.
Adjust the volume of the amplifier, tune in a station, etc.
9 Press the STANDBY/ON button of the A-R610 to turn all
the units standby.
All the units connected via remote control cords will turn on
and off at the specified time every day.
When you don't use timer, press the TIMER button to
turn it off. (The timer indicator disappears from the
display.)
Press the TIMER button again to turn it on.
RDS TUNED
RT STEREO
PTY MEMORY
SIGNAL
CH.