Note; Technical Data - Trotec SL300 Bedienungsanleitung

07. NOTE

- the appliance must neither be put into operation nor
stored at high temperatures and high humidity. (refer
also to the technical data)
- if the appliance is not to be used for a longer peri-
od, it is recommended to remove the battery from
the battery compartment in order to prevent leakage
of the battery and damage to your appliance.
- if it is windy, it is recommended to push the winds-
hield over the sensor in order to exclude interfering
noises.
- Keep the microphone dry and protect it against
shocks.

08. TECHNICAL DATA

complies with the
requirements of
accuracy
Frequency range
dynamic range
measuring range
Frequency curves
response time
microphone
display
display refreshment
max hold
min hold
hold
EN
din en 61672-1 class 2
±1,4dB
31,5hz – 8 khz
50dB
(01): 30 – 80dB
(02): 50 – 100dB
(03): 80 – 130dB
(04): 30 – 130dB (auto)
dB(a) / dB(c)
Fast (125ms); slOW (1s)
½-inch electret condensor
microphone
4-digit display with a resolu-
tion of 0.1 dB
2x per second
Freezes the maximum value
Freezes the minimum value
Freezes the current value
Operating instructiOns – sOund leVel meter sl300
alarm function the word "OVer" appears if
the measured value exceeds
the upper limit value. the
word "under" appears, if
the measured value does not
reach the lower limit value.
display update Fast display of the measured
values (20x per second)
data hold function 50 data records
date Year, month, day
time hours, minutes, seconds
power supply 1x 9V battery 006p or neda
1604 or iec 6F22
Battery lifetime at least 30 hours
(in the case of average use
and normal environmental
conditions)
Operating tempe- 0 - 40 °c, 10 - 90% r.h.
rature and relative
humidity
storage tempera- -10 - 60 °c, 10 - 75% r.h.
ture and relative
humidity
dimensions 210 mm x 55 mm x 32 mm
Weight 230g
B - 4