Installing And Connecting The Refrigerator - Dometic CoolMatic CRD0050 Montage- Und Bedienungsanleitung

Installing and connecting the refrigerator

7 Installing and connecting the
refrigerator
A
NOTICE! Safety instructions for installation on boats
Please note the following instructions for installation on boats:
• The refrigerator is designed for short-term heeling of up to 30°.
When setting up the refrigerator, note that it must be fastened to take
account of this. If you have any questions regarding installation, con-
sult your specialist dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 3, page 4).
• The refrigerator is designed for ambient temperatures between
+16 °C and +38 °C.
• If the refrigerator is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
7.1 Installing the refrigerator
A
NOTICE!
• Fasten the refrigerator as described in the operating manual to
prevent hazards.
• Keep objects clear of openings in the housing or mounting structure
(such as ventilation slots).
• The refrigerator is only suitable for installation in a fitted niche. Once
it is installed, only the front of the refrigerator may be accessible.
• If brakes are applied fully, then strong forces act in the direction of
travel. In order to prevent damage to the refrigerator and the vehicle
interior, the refrigerator should not be installed with the front facing
the direction of travel.
The refrigerator is designed for ambient temperatures between +16 °C and +38 °C.
In continuous operation, the air humidity may not exceed 90 %.
Set up the refrigerator in a dry, sheltered place. Avoid placing it near heat sources
such as radiators, gas ovens, hot water pipes etc.
14
CRD0050
EN