Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
"Reading" of parameterization/configuration: Reading mode
The code number is not necessary in order to read the parameterization or configuration.
After input of the access order
•
‚
the display shows:
+
The parameterization or configuration respectively can be displayed in turn by repeatedly pressing
but it cannot be altered. The sequence is according to that of the active para-meterization or
configuration. Points which were not activated (e. g. LL O2 B) are not displayed during the
reading.
Press the rocker switch to
136
•
Keep DOWN key depressed
‚
Press ENTER key
M
and go back to measurement.
Reading mode
With
to PARAMETER (reading mode).
Look at the parameterization with
.
Changing of settings is impossible!
With
to reading of the configuration.
M
With
to measurement.
Look at the configuration
with
and
Changing of settings is impossible!
M
With
to measurement.
and
.
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
