Installation Instructions for External Filter
Installation Tools
a. Electric drill;
b. Cross screwdriver;
c. Straight screwdriver;
1. Use screws to fasten the simplex clips on the wall;
2. Place the filter into the simplex clips;
3. Insert one end of quick-connection elbow into the water inlet of filter, then
insert the water inlet pipe into the other end of quick-connection elbow till it
reaches to the positioning mark of water inlet pipe, and then lock it with a buckle;
4. Insert one end of quick-connection elbow into the water outlet similarly, and
then insert the water outlet pipe into the other end of quick-connection elbow till
it reaches to the positioning mark of water outlet pipe;
012