Shelving And Rack Adjustment; Bulb Replacement; Reversing The Door - Nabo SBS 4900 Handbuch

Usage Information

Shelving and rack adjustment

Important note: all food and drink should be removed from all shelves and
racks before adjusting or removing them
You can adjust the shelving in the fridge compartment to your required
configuration. To remove a shelf, lift it up slightly so the plastic stabilisers that on
either side of the shelf are above the shelf rails and then pull it towards you.
You can adjust the racks in the fridge and freezer compartments to yourrequired
configuration. To remove a rack hold both sides of the rack, lift it upwards (1) and
then pull it towards you (2).
1
2

Bulb Replacement

The fridge and freezer lights are energy efficient, long life LEDs. Therefore, they
should not need replacing throughout the life of the product.
The bulb is a direct current 12V LED module and in the unlikely event it does fail
then it will need to be replaced by a qualified engineer.
refrigerator lamp
Freezer lamp
Shade
Arrow indicates the
direction of dismantle.

Reversing the Door

The doors cannot be reversed.
011