Electrical Safety; Transportation And Handling; Installingand Switching On Your Appliance - Nabo SBS 4900 Handbuch

Electrical Safety

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET
•Before switching on, make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate. This product is designed to operate
on 220 –240V AC; 50Hz. Connection to any other power source may damage the
unit.
•This product may be fitted with a non re-wireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes
lost or damaged, the plug must not be used until a suitable replacement is
obtained.
•If the plug has to be changed because it is not suitable for your socket, or
becomes damaged in any way, it should be cut off and an appropriate plug fitted
following the wiring instructions. This should be carried out by a qualified
electrician. The plug removed must be disposed of safely, as insertion into a 13
Amp socket is likely to cause an electrical hazard.

Transportation and Handling

For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the
base and rear corners of cabinet. Lift the refrigerator carefully. Never use the door
handles for lifting. To move the refrigerator on a flat level surface, tilt it slightly
backwards and push backwards.
This unit is heavy and could cause injury –ensure there are adequate people
present to move the appliance.

Installingand Switching on Your Appliance

•Operating voltage for your appliance is 220-240V at 50Hz.
•Before plugging in the power supply, ensure that the voltage on the rating label
corresponds to the working voltage of your electrical system in your home.
•Insert the plug into an efficient Ground(Earth) connection. If the socket has no
Ground(Earth)contact or the plug does not match, we suggest you call an
authorised electrician for assistance.
•Place your appliance in an area that is not exposed to direct sunlight.
•Your appliance should be placed at least 10cm away from stoves, ovens and
other heating cores.
•This appliance should never be used outdoors or left in the rain.
•When your appliance is placed next to a chest freezer or freezer, there should
be at least 10cms between them to prevent humidity on the outer surface.
•Do not place anything on your appliance and install the unit in a suitable place
so that there is at least 30cm clearance above the appliance.
•If placing your appliance next to kitchen cabinets,leave10cm between them.
•The rear of the appliance should be at least 7.5cm away from the backwall.
•The appliance must be used in the vertical position and on a flat surface.
•To level the appliance, use the adjustable feet on the appliance.
•Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
•This appliance should only be placed on a flat, firm surface.
•Choose a dry and well-ventilated space.
•The appliance should be positioned so that the plug is easily accessible.
002